Playing back a tape
Various playback modes
To operate video control buttons, set the POWER switch to VCR.
To view a still image (playback pause)
• Press
• Press PAUSE on the Remote Commander during playback. To resume normal
playback, press PAUSE again.
To fastforward the tape
• Press
• Press FF on the Remote Commander in the stop mode. To resume normal playback,
press PLAY.
To rewind the tape
• Press
• Press REW on the Remote Commander in the stop mode. To resume normal playback,
press PLAY.
To locate a scene monitoring the picture (picture search)
• Keep pressing
button.
• Keep pressing REW or FF on the Remote Commander during playback. To resume
normal playback, release the button.
To monitor the high-speed picture while fastforwarding or
rewinding the tape (skip scan)
• Keep pressing
rewinding or advancing, release the button.
• Keep pressing REW on the Remote Commander while rewinding the tape, or keep
pressing FF on the Remote Commander while advancing the tape. To resume normal
rewinding or advancing, release the button.
To view the picture at slow speed (slow playback)
Press SLOW on the Remote Commander during playback. To pause playback, press
or PAUSE on the Remote Commander. To resume normal playback, press
PLAY on the Remote Commander again.
To search the last scene recorded (END SEARCH)
Press END SCH on PAGE2 in the stop mode. The last five seconds of the recorded
section are played back then the camcorder stops.
during playback. To resume playback, press
in the stop mode. To resume normal playback, press
in the stop mode. To resume normal playback, press
or
during playback. To resume normal playback, release the
while rewinding or
again.
while advancing the tape. To resume
.
.
or
45