Indicators Displayed In The Recording Mode - Sony DCR-IP45 Quick Start Manual

Recording a picture

Indicators displayed in the recording mode

The indicators are not recorded on the tape.
40
min
JUL 4 2002
Remaining battery time indicator during recording
The remaining battery time indicator shows the approximate recording time. The
indicator may not be correct, depending on the conditions in which you are recording.
When you close the LCD panel and open it again, it takes about one minute for the
correct remaining battery time in minutes to be displayed.
Tape counter
The tape counter can be reset using COUNT RESET in the PAGE3 screen.
Remaining tape indicator
The indicator may not be displayed accurately depending on the tape.
Recording data
The recording data (date/time or various settings when recorded) are not displayed
while recording. However, they are recorded automatically on the tape. To display the
recording data, press DATA CODE on the Remote Commander during playback. You
can also operate in the PAGE3 screen during playback.
36
Remaining battery time indicator
Micro Cassette Memory indicator
STBY/REC indicator
REC 0:00:01 Tape counter indicator
45min
Remaining tape indicator
This appears after you insert a cassette and record or play back for a while.
12 : 05 : 56 PM
FN button
FN
Press this button to display operation buttons on the LCD screen.
Time indicator
The time is displayed about five seconds after the power is turned on.
Date indicator
The date is displayed about five seconds after the power is turned on.