D Setting After Directly Specifying The Main/Sub Band - Icom IC-7610 Reference Manual

I/Q SIGNAL
■ Control commands relative to the I/Q port settings (Continued)

D Setting after directly specifying the Main/Sub band

Command:
29
Specify the Main or Sub band before entering the supported commands.
When you receive the OK code (FB), or the NG code (FA), Command 29 and the Main/Sub specified 00 or 01 is omitted.
•Reading
@9 C ommand (Including the returned value)
Data
X X X X X X
00:MAIN
Command
01:SUB
Example:Reading the Main band RF gain using the "14 02" command.
Command (PC to IC-7610)
IC-7610
address
Preamble
F E F E 9 8 E 0 2 9 0 0 1 4 0 2 F D F F F F F F
Acknowledgement of a valid command (IC-7610 to PC)
PC
address
Preamble
F E F E E 0
••• X X
Data
PC
address
Sub command
MAIN/SUB Command
IC-7610
address
9 8 2 9 0 0 1 4 0 2 0 2 5 5 F D F F
Sub command
MAIN/SUB
Command
Padding
Postamble
Data (RF gain)
Padding
Postamble
11
•Setting
Command (in
Data
X X X X X X
Command
MAIN/SUB
Example: Setting the SUB band R
Command (PC to IC-7610)
IC-7610
address
Preamble
F E F E 9 8 E 0 2 9
Acknowledgement of a valid com
PC
address
Preamble
F E F E E 0 9 8 F B
••• X
Da
P
add
MAIN/SUB
IC-
add