Advertisement
To attach the cup holder:
1.
Position the cup holder on top of the lower shelf, making sure to catch the
bottom latch in the shelf component.
Figure 19
2.
Position your hands on the arrows and press down at the top of the panel.
To complete the installation:
1.
Position the badge plate on the front cover and press into place.
Figure 20
2.
Wrap the rubber gasket on top of the badge plate from the back of the display
mount so the split is pointed toward the front. Press down to snap in two tabs
at the back, then walk your hands around, wiggling and aligning the
remaining tabs as you go.
3.
Refer to the corresponding Console Installation Guide (found in the console
box) to attach your console.
4.
Plug the power cord into an appropriate outlet.
14
Advertisement
