Gemini 810 User Manual page 5

WARNINGS & CAUTIONS
WARNING: Visible and Invisible Laser Radiation – Avoid eye or skin exposure to
direct or scattered radiation.
WARNING: Laser Safety Eye Protection MUST BE WORN by the Operator, Patient,
Assistant, and anyone present when the laser is activated. Eye Protection must
conform to Specification DIN EN207 Annex II of the Directive 89/686/EEC with
wavelength protection of 810 nm-980 nm, and ±10 nm of OD 5+ such as NoIR Laser
Company filter model CYN.
WARNING: Never direct or point the beam at a person's eyes.
WARNING: Do not look directly into the beam or at specular reflections.
WARNING: Do not aim the laser at metallic or reflective surfaces, such as surgical
instruments or dental mirrors. If aimed directly at these surfaces the laser beam will
reflect and create a potential hazard.
WARNING: Never operate the laser without a fiber tip attached.
WARNING: Laser aperture at the end of the handpiece.
WARNING: Laser aperture warning label affixed to system handpiece.
WARNING: Always place the system into STANDBY mode when leaving the Gemini 810
+ 980 diode laser unattented for few minutes or between patients.
WARNING: Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
WARNING: Do not open unit housing at any time. Danger from optical radiation may
exist.
WARNING: The use of accessories, other than those specified, except those supplied or sold
by Ultradent Products, Inc., as replacement parts for internal or external components, may
result in increased EMMISSIONS or decreased IMMUNITY of the Gemini 810 + 980 diode laser.
Refer to pages 44-48 for additional information.
Class IV Laser Product
5