Quick Start - Gemini 810 User Manual

QUICK START

1.
Plug In Power Supply
During initial setup use the AC/DC power supply for at least one hour
to fully charge the battery. Plug the power supply into an AC outlet and
connect to the corresponding connector on the rear of the system.
2.
Insert AA Batteries into Activation Pedal
Install the (2) provided AA batteries into the wireless activation pedal.
When replacing the AA betteries, we recomend an ALKALINE type
battery.
3.
Turn Laser Unit ON
The universal ON/OFF button is a membrane switch that requires
pressure in order to be activated.
4.
Enter Electronic Key Passcode
Enter the electronic key passcode on the keypad using the UP and DOWN
arrow keys. The security code is UP, DOWN, UP, DOWN. A checkmark
icon will appear when the correct key is input.
5.
Select Your Desired Wavelength
Select the desired laser wavelength on the keypad:
810 nm, 980 nm, or Dual Wavelength.
6.
Select Your Desired Power Setting
Select your desired power setting, then activate the laser. (Pages 17-21)
"Please select wavelength"
13