Activation Pedal Connection - Gemini 810 User Manual

CONTROLS, OPERATION & USE

03 - ACTIVATION PEDAL CONNECTION

Connecting the activation pedal to your laser unit via Bluetooth for the first time is simple.
Install the provided 2 AA batteries
into the Activation Pedal.
Select the wavelength of choice.
16
Turn the laser unit ON.
Depress the
Connection between the activation
X
pedal and laser unit is done
automatically.
The activation pedal comes with a protective shroud
to prevent accidental laser activation. Please do not
step on the protective shroud as it could result in
accidental damage to the activation pedal.
activation pedal.
Enter the passcode.
A Bluetooth indicator will appear
on the display and activation pedal
when it is properly connected and
the laser is in Active mode.