Temperature - Maico WR 310 Operating Instructions Manual

9 Temperature

9.1 Actual room temperature
The current actual room temperature appears
in the menu Overview or Temperatures/Room
temperature.
Depending on the setting under Basic set-
tings/Room sensor configuration one of the
following values is displayed:
● Exhaust air temperature in unit
● Temperature at an external sensor
● Temperature at a KNX control unit or bus
sensor
For adjusting the actual room temperature
in the event of sensor measurement devia-
tions  Chapter 17.5.
9.2 Room setpoint temperature
The set room temperature (living area tem-
perature) can only be set if the ventilation
unit is combined with a PTC heat register or
optional supplementary heating. The supple-
mentary heating must be connected to the
unit control.
The set room temperature input field then
appears in the temperature menu. The set
room temperature can be set in steps of 0.5 °C
(setting range 18 to 25 °C).
After the set room temperature has been
adjusted, the ventilation unit automatically
adapts the actual temperature to the desired
setpoint temperature.
For information about the "Cooling in summer
operation" function  Chapter 17.5.
9 Temperature | UK
53