Heatrae Sadia Multipoint ECO 30L H Installation, Operation And Maintenance Manual page 19

Vacation Mode
Whenever the premises that the water heater is installed in are unoccupied for a period of time, vacation mode can be
selected. In Vacation mode, the water heater will maintain the water at a minimum temperature (4°C) preventing any
risk of water freezing.
To enable the Vacation mode, short press
In Vacation mode, by default, the number of vacation days is undefined
water heater will stay in vacation mode until it is manually cancelled.
The number of days can be selected by pressing
speed day selection. This mode is cancelled by selecting a new mode.
When the specified period is over , the water heater will automatically go back to the operating mode selected before
vacation mode. This mode is cancelled by selecting a new mode.
Boost
Boost mode is selected by long pressing the
Boost mode, heats the water to the selected temperature as fast as possible. After completion of the boost it will
return into the mode activated before Boost was selected. Boost can be selected at any time and overrides
programme periods. The temperature is selected by using the
The requested temperature is validated by pressing the
button until the logo is selected and validated by
or and validated by
key.
or
key.
. If no day period is specified, the
. A long press will perform a fast
, in a range from 65 °C to 70°C.
19