Supermicro X11DPT-PS User Manual page 91

Secure Boot
If this feature is set to Enabled, Secure Boot will be activated when a Platform Key (PK) is
entered. A Platform Key is a security key used to manage the security settings of the platform
fi rmware used in your system. The options are Enabled and Disabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
CMS Support
Select Enbabled for CMS support to enhance system performance. The options are Enabled
and Disabled.
Key Management

Provision Factory Default Keys
Select Enabled to install all manufacturer default keys to confi gure the following system
security settings. The options are Enabled and Disabled.
Enroll All Factor Defaults

Select Yes to install all manufacturer defaults to confi gure the following system security
settings. The options are Yes and No.
Enroll EFI Image

Select this item and press <Enter> to select an EFI (Extensible Firmware Interface) image
for the system to operate in Secure Boot mode.
Save All Secure Boot Variables

This feature allows the user to set and save the secure boot key variables specifi ed by the
user.
Platform Key (PK)

This feature allows the user to enter and confi gure a set of values to be used as a platform
fi rmware key for the system. This set of values also indicate the size, the keys numbers,
and the key source of the Platform Key. The options are Save to File, Set New, and Erase.
Key Exchange Keys

This feature allows the user to enter and confi gure a set of values to be used as a Key-
Exchange-Keys for the system. This set of values also indicate the size, the keys numbers,
91
Chapter 4: BIOS