Table of Contents
Advertisement
Chapter 4: BIOS
MMCFG Base
This feature determines the lowest MMCFG (Memory-Mapped Confi guration) base assigned
to PCI devices. The options are 1G, 1.5G, 1.75G. 2G, 2.25G, and 3G.
NVMe Firmware Source
This feature determines which type of the NVMe fi rmware should be used in your system.
The options are Vendor Defi ned Firmware and AMI Native Support.
VGA Priority
This feature selects the graphics device to be used as the primary video display for system
boot. The options are Auto, Onboard and Offboard.
SIOM: CPU1 PCI-E 3.0X16 Option ROM
Use this feature to select the Onboard SIOM Option ROM type for system boot. The options
are Disabled, Legacy and EFI.
Onboard SAS Option ROM
Use this feature to select the Onboard SAS Option ROM type for system boot. The options
are Disabled, Legacy and EFI.
Onboard Video Option ROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy and EFI.
Network Stack Confi guration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unifi ed Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If "Network Stack" is set to Enabled, the following items will display:
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE boot support. If this feature is disabled, it will not create
the Ipv4 PXE boot option. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable Ipv4 HTTP boot support. If this feature is disabled, it will not create
the Ipv4 HTTP boot option. The options are Enabled and Disabled.
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE boot support. If this feature is disabled, it will not create
the Ipv6 PXE boot option. The options are Disabled and Enabled.
75
Advertisement
Table of Contents
