Supermicro X11DPT-PS User Manual page 3

About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the X11DPT-PS motherboard.
About This Motherboard
The X11DPT-PS motherboard supports dual Intel® Xeon 81XX/61XX/51XX/41XX/31XX series
processors in the P0 socket. With the Intel C621 PCH built-in, this motherboard supports up
to 2TB of RDIMM/LRDIMM/NVDIMM DDR4 ECC memory of 2666/2400/2133 MHz in 16
slots. The X11DPT-PS provides maximum performance, system cooling, and PCI-E capacity.
This motherboard is optimized for SIOM interface with fl exible IO support and is ideal for 1U
TwinPro/2U TwinPro/ 2U TwinPro
to be installed and serviced by professional technicians only. For processor/memory updates,
please refer to our website at http://www.supermicro.com/products/.
Manual organization
Chapter 1 describes the features, specifi cations and performance of the motherboard, and
provides detailed information on the Intel C621 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when installing the
processor, memory modules and other hardware components into the system.
If you encounter any problems, see Chapter 3, which describes troubleshooting procedures
for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information on running
the CMOS Setup utility.
Appendix A lists software program installation instructions.
Appendix B lists standardized warning statements in various languages.
Appendix C lists UEFI BIOS Recovery instructions.
Preface
2 platforms. Please note that this motherboard is intended
3
Preface