Table of Contents
Advertisement
Super X11DPT-PS User's Manual
Unit Identifi er Switch/UID LED Indicator
A Unit Identifi er (UID) switch (JUIDB1) and a UID LED Indicator (UID_LED1) are located on
the rear side of the system. When you press the UID switch, the UID LED indicator will be
turned on. Press the UID switch again to turn off the LED. The UID Indicator provides easy
identifi cation of a system unit that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information
on IPMI, please refer to the IPMI User's Guide posted on our website at http://www.
supermicro.com.
Ethernet Ports
An IPMI dedicated LAN that supports Gigabit LAN is located next to the VGA port on the I/O
back panel. This LAN port is supported by the onboard AST 2500 BMC and accepts an RJ45
type cable. Refer to the LED Indicator Section for LAN LED information.
1
2
BIOS
LICENSE
X11DPT-PS
Rev. 1.10
UID Switch
Pin Defi nitions
Pin#
Defi nition
1
Ground
2
Ground
3
Button In
4
Button In
LAN Ports
Pin Defi nition
Pin# Defi nition
1
P2V5SB
10
2
TD0+
11
3
TD0-
12
4
TD1+
13
5
TD1-
14
6
TD2+
15
7
TD2-
16
8
TD3+
17
9
TD3-
18
(NC: No Connection)
38
UID LED
Pin Defi nitions
Color
Status
Blue: On
Unit Identifi ed
SGND
Act LED
P3V3SB
Link 100 LED
(Yellow, +3V3SB)
Link 1000 LED
(Yellow, +3V3SB)
Ground
Ground
Ground
Ground
1. UID
2. IPMI_LAN
3. Front UID LED
1
2
Advertisement
Table of Contents
