Adjusting The Bw 900 To Your Office Phone; Connecting The Headset To Other Bluetooth Devices (Pairing) - Sennheiser BW 900 Instruction Manual

Adjusting the BW 900 to your office phone

To ensure optimum intelligibility, adjust the BW 900 system to your
phone as follows:
Press the headset/handset switch
The connection to the headset can be established.
Put on the headset and adjust it for comfort.
Press the headset hook button
A wireless link is established between the headset and the base sta-
tion.
Pick up the phone handset from its cradle.
Adjust the telephone adjustment switch
be heard loud and clear in the headset.
Turn the microphone volume knob
Make a test call to someone while adjusting the microphone sensitiv-
ity.
Speak to the other party by alternately using the handset (head-
set/handset switch
set/handset switch
the handset.
Turn the microphone volume knob
you at a comfortable level, whether you use the headset or the hand-
set.
Hang up the phone and press either the headset hook button d or the
base station hook button B.

Connecting the headset to other Bluetooth devices (pairing)

The headset is capable of being paired with up to three Bluetooth de-
vices:
• one base station (cannot be changed)
• one mobile phone (can be changed for another mobile phone)
• one PC or one PDA (can be changed for another PC or PDA, respec-
tively)
The Bluetooth devices must feature a "hands free profile" and "headset
profile".
Notes:
As soon as you pair for example a new mobile phone, the old mobile
phone is no longer detected.
Certain features like redialling and voice dialling are only possible if
supported by the Bluetooth device.
Make sure the headset is turned on and placed close to your Bluetooth
device.
Set your Bluetooth device to Bluetooth pairing mode (see the manual
of your Bluetooth device).
Press and hold down both the headset hook button
switch (in "push" direction) until the headset LED
blue and red alternately.
The headset is in pairing mode.
4 Sec.
Note:
If pairing is not successful within 60 seconds, the headset returns
automatically to standby mode.
to the "down" position.
or the base station hook button
so that the dial tone can
to position 1.
is in the "up" position) and the headset (head-
is in the "down" position), always starting with
so that the other party can hear
Setting up the BW 900 system
.
and the multi
starts flashing
11