Operating Mode For All Models - Eaton 9E-IN 1K User Manual

6. Operating Mode for All Models

Different messages/strings will be displayed on the LCD screen
corresponding to different UPS operating modes, as shown in the following
table 6.1. Different Warning/fault code, as shown in the following table 6.2.
Only one normal operating string or fault string is presented a time.
However if several warnings happen at the same time, they will be
displayed on the LCD alternately. In this case, the normal operating mode
string and the warning string will be shown circularly. Once a fault comes
forth, all previous warnings will not be shown again; only the fault string will
be presented.
Operating mode
No output mode
Bypass mode
Battery mode
Battery test mode
Converter mode
Warning
Site Fail(for 1K/2K/3K)
Fan fail
Battery over voltage (over charged)
Battery low
Charge fail
Inverter temperature high
Battery open
Overload
Digital bigger charger fail(for 2KXL/3KXL)
Internal bigger charger fail
Inner temperature high
Table 6.1：Operating Mode
Line mode
ECO mode
Table 6.2：Warning& Fault Code
String
SITE
FANF
HIGH
bLOW
CHGF
TEPH
bOPN
OVLD
dCHF
ICHF
ITPH
-21-
Code
STbY
bYPA
LINE
bATT
TEST
ECO
CVCF