ZyXEL Communications NSG50 User Manual page 15

Table 7 Dashboard (continued)
LABEL DESCRIPTION
Close Widget (E) Click this to close the widget. Use Widget Settings to re-open it.
Device Information
Model Name This field displays the model name of this NSG.
Serial Number This field displays the serial number of this NSG. The serial number is used for device tracking
and control.
MAC Address This field displays the MAC addresses used by the NSG. Each physical port has one MAC
Range
address. The first MAC address is assigned to physical port 1, the second MAC address is
assigned to physical port 2, and so on.
Firmware This field displays the version number and date of the firmware the NSG is currently running.
Version
System Status
System This field displays how long the NSG has been running since it last restarted or was turned on.
Uptime
Current Date/ This field displays the current date and time in the NSG. The format is yyyy-mm-dd hh:mm:ss.
Time
Click on the link to see the Date/Time screen where you can make edits and changes to the
date, time and time zone information.
Nebula This field displays whether the NSG is registered and can connect to the Zyxel Nebula Control
Connectivity
Center (NCC).
Status
Extension Slot
# This field is a sequential value, and it is not associated with a specific entry.
Extension Slot This field displays the name of each extension slot.
Device This field displays the name of the device connected to the extension slot (or none if no device
is detected).
USB Flash Drive - Indicates a connected USB storage device and the drive's storage capacity.
Status This field displays none if no device is detected.
Ready - A USB storage device connected to the NSG is ready for the NSG to use.
Unused - The NSG is unable to mount a USB storage device connected to the NSG.
Chapter 2 Dashboard
NSG Series User's Guide
15