Step 5 Optional Mounting; Mounting Wlan-Antennas (Optional); Wlan-Aerial Cable Mounting (Optional); Speaker Mounting (Optional) - Fujitsu SMARTCASE S500 Assembly Instructions Manual

Assembly Instructions SMARTCASE S500

Step 5 Optional Mounting

Mounting WLAN-antennas (optional)

Please check the color-coding of the antennas. On the front side the bays of the antennas are firmly defined and
marked with black and gray.

WLAN-aerial cable mounting (optional)

Hang the black WLAN cable in the hooks (red circles) and then plug the black cable into the connection with the
black triangle and the gray cable next to it on the module (yellow
Attention: correct mounting of the WLAN- cable to avoid later collision with the Typ- C- plug

Speaker mounting (optional)

Before assembling the front panel the speaker needs to be installed into the front panel first.
__________________________________________________________________________________________________________________________________________________________
Page 14 of 23
Push the antenna cables completely through the
opening in the housing and pay attention to the
guide nose (red circle).
Carefully install the WLAN antennas. The metal plate
must not be bent.
circle).
www.fujitsu.com