Download  Print this page
   

Advertisement

F u j i t s u A m e r i c a , I n c .
Silicone Sleeve User's Guide
This silicone sleeve is a rugged, lightweight case for protecting your
Slate PC.
Figure 1. Silicone Sleeve with System Installed
The silicone sleeve attaches snugly and securely to your computer.
Please read this manual before installing using the silicone sleeve.
Note: The color of your sleeve may vary from that in the photos.
Inserting the System into the Sleeve
The silicone sleeve is designed to provide a secure fit for the system.
In order to ensure your system is installed correctly, please perform
the following steps.
1.
Align the system above the sleeve so that the fingerprint sen-
sor and web camera opening are aligned with those features
on the back of the tablet
2.
Tuck one of the narrow ends of the system into the sleeve
under the flexible edge (Figure 3). Lay the other end of the
system atop the other end of the sleeve.
3.
Due to the secure fit of the sleeve, the unsecured corners of the
sleeve must be bent backwards to allow the system to be laid
into it, after which the corners are bent back over the system
corners to secure them (Figure 4).
.
(Figure 2)

Advertisement

Table of Contents

   Also See for Fujitsu Silicone Sleeve

   Related Manuals for Fujitsu Silicone Sleeve

   Summary of Contents for Fujitsu Silicone Sleeve

  • Page 1 Note: The color of your sleeve may vary from that in the photos. Inserting the System into the Sleeve The silicone sleeve is designed to provide a secure fit for the system. In order to ensure your system is installed correctly, please perform the following steps.
  • Page 2 Web Camera Fingerprint Pen Holder Opening Sensor Opening Threaded insert holes (for use with optional hand strap) Figure 2. Silicone Sleeve - Back Figure 3. Laying in System...
  • Page 3 (Figure 2). Using the Optional Docking Cradle A system that is installed in the silicone sleeve can be used with the optional docking cradle. Note that there is a thinner section...
  • Page 4 Fujitsu America, Inc. 1250 E. Arques Avenue, Sunnyvale, California 94085 For more information, call 1-800-FUJITSU or visit our Web site at: www.ShopFujitsu. For technical support call:1-800-8FUJITSU (1-800-838-5487) Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Ltd.

Comments to this Manuals

Symbols: 0
Latest comments: