Product Recycling Information - ABB Endura AZ series User Manual

Endura AZ series integral and remote transmitter
Combustion oxygen monitor
The equipment is protected through double insulation.
This symbol, when noted on a product, indicates a potential hazard which could cause serious personal
injury and / or death.
The user should reference this instruction manual for operation and / or safety information.
This symbol, when noted on a product enclosure or barrier, indicates that a risk of electrical shock and / or
electrocution exists and indicates that only individuals qualified to work with hazardous voltages should
open the enclosure or remove the barrier.
This symbol indicates that the marked item can be hot and should not be touched without care.
This symbol indicates the presence of devices sensitive to electrostatic discharge and indicates that care
must be taken to prevent damage to them.
This symbol identifies a risk of chemical harm and indicates that only individuals qualified and trained to
work with chemicals should handle chemicals or perform maintenance on chemical delivery systems
associated with the equipment.
This symbol indicates the need for protective eye wear.
This symbol indicates the need for protective hand wear.
Electrical equipment marked with this symbol may not be disposed of in European public disposal
systems. In conformity with European local and national regulations, European electrical equipment users
must now return old or end-of-life equipment to the manufacturer for disposal at no charge to the user.
Products marked with this symbol indicates that the product contains toxic or hazardous substances or
elements. The number inside the symbol indicates the environmental protection use period in years.

1.4 Product Recycling Information

Electrical equipment marked with this symbol may not be disposed of in European public
disposal systems after 12 August 2005. In conformity with European local and national
regulations (EU Directive 2002 / 96 / EC), European electrical equipment users must now
return old or end-of-life equipment to the manufacturer for disposal at no charge to the
user.
Note. For return for recycling, please contact the equipment manufacturer or supplier for instructions
on how to return end-of-life equipment for proper disposal.
4
1 Safety
IM/AZ20E–EN Rev. F