Martel MC1210 Reference Manual page 37

Table of Contents

Advertisement

Command
CPRT_COEFC
CPRT_COEFC?
CPRT_MIN_T
CPRT_MIN_T?
CPRT_MAX_T
CPRT_MAX_T?
CPRT_R0
CPRT_R0?
FAULT?
FREQ_LEVEL
FREQ_LEVEL?
FREQ_TYPE
FREQ_TYPE?
FREQ_UNIT
FREQ_UNIT?
FUNC?
LOCAL
LOCKOUT
LOWER_MEAS
L_PRES_UNIT
OUT
OUT?
PRES?
PRES_UNIT?
PULSE_CNT
PULSE_CNT?
REMOTE
RTD_TYPE
RTD_TYPE?
RTD_WIRE
RTD_WIRE?
SIM
SIM?
ST_CLOSE?
ST_DEAD?
ST_OPEN
ST_START
TC_TYPE
Find Quality Products Online at:
Description
Sets the custom RTD coefficient C
Returns the custom RTD coefficient C
Sets the custom RTD minimum temperature
Returns the custom RTD minimum temperature
Sets the custom RTD maximum temperature
Returns the custom RTD maximum temperature
Sets the custom RTD R0 resistance
Returns the custom RTD R0 resistance
Returns the error code of an error that has occurred
Sets the frequency and pulse amplitude
Returns the frequency and pulse amplitude
Set the frequency output to continuous (frequency) or pulse.
Returns frequency output type, continuous or pulse
Sets the unit for frequency and pulse
Returns the unit for frequency and pulse
Returns the current mode of the upper and lower display
Returns user to manual operation of the calibrator
Locks out the keypad of the calibrator, and allows for remote operation only
Sets the mode for measuring on the lower display.
Sets the pressure unit on the lower display
Sets the output of the calibrator
Returns the output of the calibrator
Returns the model and serial number of the attached pressure module
Returns the pressure unit for the upper and lower display
Sets the number of pulses for the pulse train
Returns the number of pulses in the pulse train
Puts the calibrator in remote mode
Sets the RTD type
Returns the RTD type
Sets the number of wires used by the RTD mode.
Returns the wire number setting used in the RTD mode
Sets the output for mA simulation
Returns the output of the mA simulation
Returns value at which the switch closed
Returns value of the deadband of the switch
Returns value of the deadband of the switch
Starts a switch test
Sets the thermocouple type
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents