Filling Methods; Filling With A Scuba Fill Adapter - Aqua Lung SEA MK User Manual

Filling Methods

1. Supply (SCUBA) cylinder with SCUBA fill adapter (PN 108325).
2. Compressor with compressor fill adapter (PN M100656).
3. Compressor with HP fill adapter (PN 102865).

Filling with a SCUBA Fill Adapter

NOTE: The SEA system does not include a SCUBA fill adapter. This adapter
(PN 108325) may be purchased separately (Fig. 5).
CAUTION:
unless you have received the necessary training and authorization to do
so. If done incorrectly, this procedure poses certain hazards which may
cause severe injury or death.
CAUTION:
fill system gauge to indicate accurate cylinder pressure.
WARNING:
from an air supply where the regulated pressure exceeds 3000 PSI (207
BAR). Doing so could cause a dangerous malfunction to the fill adapter or
weaken the cylinder and safety plug, resulting in serious injury or death.
Do not attempt to fill the SEA directly from a supply cylinder
The dial or pin pressure gauge is for reference only. Use the
DO NOT attempt to use the SCUBA fill adapter to fill the SEA
Figure 5
O-Ring
9