Code Alarm Power Elite PC 4100 Installation Instructions Manual page 12

2. System Power-Up and Programming,
Press to
turn feature
DISARM
Press to reset
all options to
factory defaults
4. Press the Arm button to turn the option on or off.
The vehicle status indicator on the dashboard indicates whether an
option is on or off.
• If the selected option is ON, the indicator will light.
• If the selected option is OFF, the indicator will
turn off.
• The status indicator will turn on or off when an option is changed.
5. When changes are complete, press and release the emergency
override button to continue to the next option bank. (Siren or horn
will sound five (5) times.)
6. To reset all options back to factory defaults, press the DISARM button.
Note: Option Bank Installer options will never reset.
7. Turn ignition off to exit programming.
See Options Chart on page 13.
12
ARM
on or off
cont'd
PANIC
Press to
advance to
next feature