Page 1
AUBH1802 BATHROOM FAN HEATER REPLACEMENT COMPONENT LIST INCLUDED This unit complies with CSA and UL standards UNIWATT is a line of products manufactured by STELPRO. For more information please contact customer service. INSAUBH1017...
IMPORTANT INSTRUCTIONS WARNING Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.
INSTALLATION INSTALLATION CAUTION – HIGH TEMPERATURE; RISK OF FIRE. KEEP - Insert the pins. ELECTRICAL CORDS, DRAPERY, FURNISHINGS, AND OTHER - Insert the two top screws provided, leaving a gap of 5/16 in between the COMBUSTIBLES AT LEAST 3 FEET FROM THE FRONT OF THE screw head and the wall (Fig.2).
OPERATION AND MAINTENANCE OPERATION 41ºF TIMER WARNING: THE HEATER MUST BE PROPERLY INSTALLED BEFORE IT IS USED. The fan heater has two knobs, one for the thermostat and one for the 60-minute timer. 86ºF The unit has two operating modes. ROOM WARM-UP WITH QUICK ROOM WARM-UP TEMPERATURE CONTROL...
LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY LIMITED This limited warranty is offered by Stelpro Design inc. (“Stelpro”) and applies to the following product made by Stelpro: UNIWATT AUBH1802 model. Please read this limited warranty carefully. Subject to the terms of this warranty, Stelpro warrants its products and their components against defects in workmanship and/or materials for the following periods from the date of purchase: 2 years.
Need help?
Do you have a question about the AUBH1802 and is the answer not in the manual?
Questions and answers