Page 1
UBH1802 Bathroom Fan heater replacement component list included this unit complies with csa standards UNIWATT is a line of products manufactured by STelpro. For more information please contact customer service. INSUBH0515...
ImPoRTAnT InSTRUCTIonS warning Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.
installation installation to Reduce the Risk of fiRe, do not - Insert the two top screws provided, leaving a gap of 5/16 in (8 mm) stoRe oR use gasoline oR otheR between the screw head and the wall (Fig.2). flammable vapoRs and liquids in the - Hang the unit on the two installed screws while holding it securely in vicinity of the heateR.
operation and maintenance opeRation 5ºC timer WaRning: the heateR must be pRopeRly installed befoRe it is used. The fan heater has two knobs, one for the thermostat and one for the 60-minute timer. 30ºC the unit has two operating modes. room Warm-up With temperature QuicK room Warm-up control...
This limited warranty is offered by Stelpro Design inc. (“Stelpro”) and applies to the following product made by Stelpro: UnIWATT Ubh1802 model. please read this limited warranty carefully. Subject to the terms of this warranty, Stelpro warrants its products and their components against defects in workmanship and/or materials for the following periods from the date of purchase: 2 years.
Need help?
Do you have a question about the UBH1802 and is the answer not in the manual?
Questions and answers