File Uploader; Data Transmission - GCC Technologies AR-24 User Manual

3.3 File Uploader

3.3.1 Installation

"File Uploader" is a tool to help loading files for direct output.

The program ONLY supports HPGL format-files generated via GCC Cutter driver.
 Copy the GCC File Uploader.exe file in the Accessories folder of the AR-24's
Installation CD onto your local drive to finish installation.
 Launch GCC File Uploader by double-click on the icon
3.3.2 Functions of File Uploader

Port setup
 This function will be activated while choosing COM port for data transmission.
 Press the Port setup button to pop up the setup window for parameter change
.
3-6)

Repeat
 Activate this function by click on the Repeat's checkbox.
 Repeat Delay – the pause time between jobs; Unit: second.
 Repeat Counts – the number of repeat jobs.

3.4 Data Transmission

There are two options to transmit the data from the computer to the cutting plotter:
Option 1: With proper interface settings, the data can be transmitted from your application
software package to the cutting plotters directly.
Option 2: Most cutting software packages are able to emulate HP-GL or HP-GL/2 commands,
Operation
Figure 3-5
3-5
AR-24 user manual
.
(Figure 3-5)
Figure 3-6
(Figure