Cleaning The Grid Drum; Cleaning The Pinch Rollers - GCC Technologies AR-24 User Manual

AR- 24 user manual

4.2 Cleaning the Grid Drum

 Turn off the cutting plotter, and move the tool carriage away from the area needed to be cleaned.
 Raise the pinch rollers and move them away from the grid drum for cleaning.
 Use a bristle (a toothbrush is also acceptable) to remove dust from the drum surface. It needs to
rotate the drum manually to clean the drum completely (Figure 4-1).
Figure 4-1

4.3 Cleaning the Pinch Rollers

If the pinch rollers need a thorough cleaning, use a lint-free cloth or cotton swab to wipe away the
accumulated dust from the rubber portion of the pinch rollers. To prevent the pinch rollers from rotating
while cleaning, use your fingers to hold the pinch rollers in place.
Use a lint-free cloth or cotton swab rinsed with alcohol to remove the embedded or persistent dust.
Basic Maintenance 4-2