GCC Technologies AR-24 User Manual page 17

CAUTION!

Make sure the Primary and Secondary pinch rollers are set to right
positions.

Position the Primary Pinch Rollers at the right and left sides of media.
Position the Secondary Pinch Roller at the center of media.
Figure 2-17
Secondary Pinch Roller
Figure 2-18
NOTE:

Always adjust the position with the pinch rollers released (raised).

Always reposition the pinch roller by holding the center of the pinch roller and
move it from the REAR end of the machine. (Figure 2-19)

DO NOT move the pinch roller by holding its FRONT rubber roller (Figure 2-20).
Installation
!!
(O)
Primary Pinch Roller
(X)
2-9
AR-24 User Manual
Correct
Incorrect