Table of Contents
Advertisement
Rev. 1.0
3 Safety Information
3.1 General Information
The construction of this device is according to the latest technology and is absolutely reliable. The individual
components as well as the complete device are continuously checked by our quality management team.
3.2 Basic Safety Instructions
Basic conditions for a safe handling and a failure-free operation of the device are:
Caution!!
•
It is the customer's responsibility that all relevant safety measures are followed.
•
The device will only be used for the designated purpose.
•
No changes will be made at the device. The customer carries the sole responsibility for
consequences resulting from failure to observe this guideline. Please contact Walther Sys-
temtechnik GmbH for any desired modifications.
•
Make sure that the device is always in a safe operational condition. Checks for proper
function or damages have to be performed by specialists on a regular basis. Dismounting
will only be made by authorized personnel and while using the operating manual. If re-
quested, we will also offer trainings on the device in order to teach your personnel the
required knowledge.
•
Disconnect the device from compressed air / grease supply for all maintenance tasks. All
lines and hoses have to be pressure-less.
• Check all lines, hoses and screwed joints regularly for leakages and apparent damages!
Repair damages immediately!
•
Always make sure that the actual workstation and the device are clean and clearly arrange;
and this is routinely checked.
• Please observe the guiding rules and regulations for accident prevention at the workplace.
3.3 Dangers from Using the Device
The construction of this device and all assembly groups is according to the latest technology and is absolutely
reliable. However, there may be dangers for the user or third parties or other physical assets, if not used cor-
rectly.
Warning!! Use device only:
•
for the designated purpose; and
•
in a safe and operational condition.
•
Immediately correct failures which can adversely affect safety and security!
3.4 Dangers from Residual Energy
Please instruct the operating personnel on the respective measures to be taken against the occurrence of me-
chanical, hydraulic, pneumatic and electric / electronic residual energies.
WALTHER Temperature Controller Bundle WTRB-x-x
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 6 of 42
Hide quick links:
Advertisement
Table of Contents
