Rev. 1.0
Entering values
When entering values in the actual levels, the lower display shows you the symbol of the parameter,
(1)
0
(C)
(B)
Pd 1
Entering times
Time values are displayed with a decimal point in the middle and to the right. Time units can be configured.
(1)
88.88.
(C)
(B)
tO
Procedure
Select parameter with button (B) or (C)
1.
Change into entering mode with button (A): lower display is blinking.
2.
Change value with button (B) or (C). The longer you press the button, the faster the value changes,
3.
Accept settings with button (A) (will be automatically saved after 2 [s] ) - or use button (D) for cancel-
4.
ing input (value will not be saved)
WALTHER Temperature Controller Bundle WTRB-x-x
1
(A)
PD 1
(3)
00.28.
(A)
tO
(3)
(C)
(1) Select parameter (lower display -
green)
(B)
(2) Change value (upper display - red)
(2)
(3) Parameter blinking
(C)
(1) Select parameter (lower display -
green)
(B)
(2) Change value (upper display - red)
(3) Parameter blinking
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 27 of 42