Rev. 1.0
Requirements for wire end ferrules and cable lug
Wire end ferrule
Cable lug
Pin terminal
For UL applications
Housing
Type of housing
Dimensions (Front)
Switchboard cut/opening
Minimum distance horizontal / vertical
Mounting depth
Ambient / storage temperature range
Climate resistance
Set-up altitude
Operating position
Protection type
Weight (fully equipped)
Certification/Mark of Conformity
Mark of conformity c UL us of the verifying authority Underwriters Laboratories with certificate number
E201387 based upon test principles UL 61010-1 CAN/CSA C22.2 No. 61010-1
WALTHER Temperature Controller Bundle WTRB-x-x
Pie shape, without plastic sleeve according
to DIN 46228 Part 1,
with plastic sleeve according to DIN 46228
Part 4
Open crimp terminal, similar to DIN 46237
for closed crimp terminal
According to DIN 46231
Use of cable lugs and wire end ferrules ac-
cording to
UL 486A-B (UL listed or recognized)
Plastic housing for mounting in switchboard
according to DIN IEC 61554 (use indoors)
48 [mm[ x 48 [mm[
45 [mm] x 45 [mm]
11 [mm] / 30 [mm] (65 [mm] with USB cable
max. 95 [mm]
-5 ... +55 [°C] / -40 ... +70 [°C]
rel. humidity < 90[%] annual average without
condensation
max. 2000 [m] above NN
Any
According to DIN EN 60529, front IP 65,
back IP 20
ca. 150 [g]
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 20 of 42