Walther WTRB-24DC-3500 Operating Manual page 38

Rev. 1.0
Alarm function – actual value (AFPr):
Alarm function – desired value (AFSP):
Turn-on delay (tOn):
Timer:
Function (Fnct):
Outputs:
Analog output:
Not existing
Binary outputs:
Function binary output 1:
Function binary output 2:
Function binary output 3:
Binary Function:
Binary input:
Function:
Limit value monitoring:
1.Limit value monitoring:
Function:
2.Limit value monitoring:
Function:
Timer :
Function:
Display / Operation:
Display
Upper display (diSU):
Lower display (diSL):
Change display for timer start (diSt):
Decimal place (dECP):
Operation
Timeout (tout):
Locking levels (CodE):
Function key short (tAS):
Function key >2 sec (tASt):
Interface:
Baud rate (bdrt):
Device address (Adr):
Table 5: Parameters of the WTR-x in the standard configuration
WALTHER Temperature Controller Bundle WTRB-x-x
Analog input 1
Current desired value
0 s
No function
Limit value monitoring 1
Controller outlet 1
Limit value monitoring 2
Locking levels
None
None
None
Actual value
Current desired value
No change in display
XXX .X
180 [s]
Parameter and configuration level
No function
Switch to manual operation
9600 Baud
1
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 38 of 42