4G Interface; Gps / Clock System - Siemens Sicore II Installation And Commissioning Manual

Product Features Description
4.4. 3G/4G Interface
The 3G/4G modem interface is a factory fit option and allows the user to connect to the
camera over a 3G/4G link. The installation location should be checked for signal coverage for
the service provider selected.
Do not obstruct the top surface of the camera as the 3G/4G antenna is located under the sun
shield in this region.
A SIM must be fitted and the interface configured correctly for the modem to operate. See
section 5.6.6 for SIM installation. Refer to refer to the Sicore II Operating Instructions
Handbook (Ref para. 1.3) for modem configuration.
4.5.

GPS / Clock System

The clock system uses the inbuilt GPS receiver. For this to work successfully the top of the
camera must have a good 'view' of the sky and not be obstructed in any way. A basic
configuration process and guidance on how to check the signal strength is included in
section 7.2. For a full description of this configuration refer to refer to the Sicore II Operating
Instructions Handbook (Ref para. 1.3)
Sicore II Installation and Commissioning Guide
667/HB/52600/000 Issue 2 Unrestricted
21