Plug In The Machine And Switch On The Power; Foot Control Use - Kenmore 385. 17928 Owner's Manual

• Plug in the Machine and Switch on the Power
Power supply plug Power
NOTE:
Plug \
connector
Machine
plug
J
Before inserting the plug into your
machine, be sure the power switch is
OFF.
1. Check your outlet to be sure it is a 110to 120
Volt AC outlet.
2. Insert the machine plug into the three-prong
outlet, as shown. It will only fit one way.
3. Insert the power supply plug into the outlet.
4.
/
Sewing light Light and _1
power switch
J
Push the light and power switch to turn
on the power and sewing light.
SAFETY FEATURE:
Your machine wilt not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
children.
• Foot Control Use
/
Foot control
The foot control
which you sew.
regulates the speed at
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres-
_Uli_ _llylltly,
NOTE:
The foot control is sensitive and
will increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.