Horizontal Spool Pin - Kenmore 385. 17928 Owner's Manual

• Bobbin Winding
f
I Horizontal Spool Pin
I
f
Additional Spool Pin
®
Pull the clutch knob away from the machine to disengage clutch.
(_ Draw the thread from the spool.
Guide the thread around the bobbin winder thread guide.
(_) Insert the thread through the hole in the bobbin, threading from the inside to the outside.
_j Put the bobbin on the bobbin winding spindle, and push it to the right.
(_) With the free end of the thread held in your hand, depress the foot control.
(_ Stop the machine when it has made a few turns, and cut the thread close to the hole in the bobbin.
Depress the foot control again. When the bobbin is fully wound, it will stop automatically.
(_) Return the bobbin winder to its original position by moving the spindle to the left, and cut the
thread as shown.
(_ Push in the clutch knobto engage clutch.
The machine will not sew until the clutch knob is pushed in.
F
17