Kenmore 385. 17928 Owner's Manual page 63

[
I
Set the Machine
for any of these stitch
Top thread tension
control 3 to 7
Stitch width
control I''
(maximum)
2_ 3,_. 4
Stitch length control
brown stretch stitch
positio_ or grue, t zu_qe
A: Zigzag foot
F: Satin stitch foot
Twin needle
I
\
Turn off the power switch. (see page 6).
Insert the additional spool pin in the hole. (see page 1__6).
Place the felt and the spool on the additional spool pin. (see page 16__).
Prp.pare the too thread for additional spool pin. (see paqe 19).
Thread then is slipped into needle bar thread guide as illustration A.
Chan_ the needle to twin needle° (see page !5__.)-
Thread needles from front to back.
Illustration A
J
NOTE:
When changing the direction of sewing, turn the hand wheel so needles are
in the up position.
When sewing with twin needle do not use a stitch width which goes past
the twin needle mark ( _r ).
Twin needle is an optional item for all models.
61