Kenmore 385. 17928 Owner's Manual page 14

• Change the Presser Foot (Continued)
To Snap On
f
2.
To Snap On the Presser Foot:
1. Place the presser foot so the hori-
zontal pin on the foot lies just
under the groove of the foot
holder.
Lower the presser foot holder to
lock the presser foot in place.
NOTE: If you do not hear the
presser foot snap ill place,
press down on the presser
foot holder firmly until you
hear the snap.
12
• PresserFoot Types
Zigzag Foot
A: Zigzag foot
Use this
stitcing.
[
foot for both straight and zigzag
Uses: Zigzag stitching (see page 3_6),
Bar tacking (see page 3_88),
Button sewing (see page 40),
Overcast stitch (see page 41),
Lace work (see page 4_33),
Three-step zigzag (see page 44),
Box stitching (see page 4_55),
Two-point shell stitching
(see page 466),
Fagoting (see page 46),
Two-point box stitch (see page 4_7),
Overedging stitch (see page 4__]7),
Rick-rack stretch (see page 4__9_9),
Smocking (see page 50),
Elastic stretch (see page 5_11 ),
Stretch patching (see page 52),
Herring bone stretch (see page 5_22).
Straight Foot
% H: Straight foot
Use this foot exclusively for straight stitching
using center needle position only.
Uses: Straight stitching (see page 311),
Topstitching (see page 33),
Straigh t stretch (see page 49).