Abit WI-2P User Manual page 42

3-12 Chapter 3
USB 2.0 Controller
This item allows you to select the USB ports to be USB 2.0 ([Enabled]) or USB 1.1
([Disabled]) specification.
USB Keyboard Support
This item allows you to select [BIOS] for using USB keyboard in DOS environment,
or [OS] in OS environment.
USB Mouse Support
This item allows you to select [BIOS] for using USB mouse in DOS environment, or
[OS] in OS environment.
AC97 Audio
When set to [Enabled], the onboard audio codec will be detected and supported. IF
you want to use audio adapter other than the one onboard, set this item to [Disabled]
Onboard LAN Controller
This item enables or disables the onboard LAN controller.
Onboard LAN Boot ROM
When set to [Enabled], this item allows the system to boot from network by the
onboard LAN controller boot ROM.
Onboard SCSI Controller
This item enables or disables the onboard SCSI controller.
Init Display First
Two options are available: PCI Slot and AGP. The default setting is AGP. When you
install an additional display card, you can choose either a PCI display card or an AGP
display card to activate the display boot-up screen.
POWER ON Function
This item allows you to select which way you want your system to power on. Seven
items are available: Password Hot Key Mouse Left Mouse Right Any
Key BUTTON ONLY Keyboard 98. The default setting is BUTTON ONLY.
WI-2P