Top View; Inside View - Springfree R132 Installation And User Manual

3
Outside Person: On the surface of your mat, locate the 4 black plastic sensor mounts. These are your 4 sensor
positions.
Inside Person: Starting at sensor position
of the mat rod holder pocket, as shown.
Inside Person: Moving to the le around the trampoline, install ONE cable clip in front of each mat rod holder pocket
between sensor positions
Inside Person: Repeat this process from sensor positions
NOTE - Before proceeding, double check that each cable clip is pushed fully onto the edge of its
pocket and that there are no cable clips installed in front of any of the sensor positions.
6

TOP VIEW

3
?
2
1
3
and . Do not install a cable clip in front of any of the sensor positions.
3 2
4
, locate the first mat rod holder to the le . Install a cable clip at the front
to and
2 1 1

INSIDE VIEW

A B
to .
4