Warranty; Safety Instructions For Miter Saw; Mounting The Miter Saw - Craftsman 113.23522 Owner's Manual

fir FULL ONE YEAR WARRANTY ON CRAFTSMAN MITER SAW
within .... one year from the date of purchase, this Craftsman Miter Saw fails due to a defect in
material or workmanship, Sears will repair it, free of charge.
Warranty service is available by simply contacting the nearest Sears service center/department
throughout the United States.
This warranty applies only while this product is used in the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
Sears, Roebuck and Co., D/817 IL 60179
Safety instructions for Miter Saw .............................................
Safety is a combination of common sense, staying alert
and knowing how your miter saw works Read this
manual to understand this miter saw.
SAFETY SIGNAL WORDS
DANGER: if the safety information is not followed,
someone Wilt be seriously injured or killed.
_4_WARNING: if the safety information is not fof_
lowed, someone Could be seriously injured or kilted
_4_CAUTION: If the safety information is not followed,
someone May be injured_
Before Using The Saw:
WARNING: To avoid mistakes that could cause
serious, permanent injury, do not plug the miter
saw in until the following steps have been satis-
factorily completed°
, Completely assemble and align saw. (See
"Assembly" and "Alignment" sections within)
• Learn the use and function of the trigger switch,
upper and lower blade guards, stop shaft, bevel tock
knob (Model 113235220 & 113_235240 only) and
cover plate stop screw (see "Getting to Know your
Miter Saw" section within)
• Review and understand all safety instructions and
operating procedures in this manual
• Review the maintenance methods for this miter saw
(See "Maintenance" section within)
• Find and Read the following labels on the miter saw:
XkWARNING / ADVERTENCIA
When Installing Or Moving The Miter Saw:
• Before moving the saw, lock the miter, bevel and
power head positions. Unplug the power cord.
• To avoid back injury, get help when you need to lift
the saw
• Never carry the tool by the cord or power head
switch handle Damage to insulation could cause an
electric shock Damage to wire connections could
cause a fire. A carry handle is provided
Avoid Dangerous Environment.
• Use the miter saw in a dry, indoor place protected
from rain
• Keep work area well lighted
• Place the saw so neither the user nor bystanders are
forced to stand in line with the blade Thrown debris
could injure people in its path
To avoid injury from unexpected saw movement:
• Put the miter saw on a firm level surface where there
is plenty of room for handling and properly support-
ing the workpiece.
• Support the miter saw so the table is level and the
saw does not rock.
• Bolt or clamp the miter saw to its support.
• Never Stand On Tool. Serious injury could occur if
the tool tips or you accidentally hit the cutting tool.
Do not store anything above or near the tool where
anyone might stand on the tool to reach them.
To avoid injury or death from electrical shock:
• This Tool Is Double Insulated to give you added
protection. Double insulation does not take the place
or normal safety precautions when operating this
tool. When servicing this double insulated tool, use
only identical parts
. Make sure your fingers do not touch the plug's metal
prongs when plugging or unplugging the miter saw