Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 5482 Service Manual

Hide thumbs Also See for Inspiron 5482:

Setup and speci?cations (24 pages)

Table Of Contents

Table of Contents

Identifier

Status

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your

your

computer. For more safety best practices, see the Regulatory Compliance home page at

regulatory_compliance.

Identifier

Status

Procedure

Place the I/O board on the palm-rest and keyboard assembly, and then align the screw holes on the I/O board with the screw holes on

the palm-rest and keyboard assembly.

Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.

Slide the fingerprint-reader cable into the connector on the I/O board and close the latch to secure the cable.

Slide the I/O-board cable into the connector on the I/O board and close the latch to secure the cable.

Adhere the tape that secures the I/O-board cable to the I/O board.

Identifier

Status

Post-requisites

Replace the

base

cover.