E197-0002 Due To The Worn Coating Of Paper Pick-Up Assembly Cable - Canon imageRUNNER ADVANCE 8500 series Troubleshooting Manual

E197-0002 due to the worn coating of paper pick-up assembly
cable
[Symptom]
E197-0002 may occur.
- E197-0002 : Serial communication error
[Cause]
If the cable is in contact with the roller spindle for the pick-up assembly [1] and its coating is worn, a short circuit occurs and it
results in the above-mentioned symptom.
Photo [A] shows the state of that bent cable is in contact with the roller spindle. Photo [B] shows the normal state of that the cable
is placed straight.
[Service work]
When the above symptom occurs, check the cable adjacent to the roller spindle for paper pick-up assembly.
If the coating of cable has worn, the replacement of paper pick-up assembly or cable is required. If the coating of cable has not
worn, check for the other causes.
[Service parts]
- PAPER PICK-UP ASS'Y, RIGHT : FM0-3207
- PAPER PICK-UP ASS'Y, LEFT : FM0-3208
- CABLE, PAPER PICK-UP ASS'Y : FM4-1078
- CABLE, DECK PICK-UP, LEFT : FM4-1296
78