Scanning Barcodes; Scan Engine - Honeywell ScanPal EDA51 User Manual

P50

Scanning barcodes

Scan engine will emit scanning beams for accurate barcode aiming. It will also support a full range of 360°
scanning, which will make barcode scanning more convenient.
1. Tap or pull upward
2. Align the scanning window with the barcode and stably place the terminal a few inches away from the
barcode.
3. Press one of the scan keys or tap Scan on the interface. Make sure the entire barcode is within the
scanning beam range.
4. When the scanning is successfully completed, you will hear a "beep" sound, and the Good Read LED
will open immediately.
Note: Before scanning a barcode, you need to enable the desired barcode Symbology in the settings.

Scan Engine

EDA51-X equips Honeywell N6603 scan engine.
The N6603 series integrates Honeywell's Adaptus 6.0 technology for unparalleled 1D and 2D scanning
performance.
Items
Sensor
Illumination
Aiming
Typical frame rate
Motion Tolerance
Field of View
Scan Angles
Symbol Contrast
Performance
Proprietary CMOS sensor with global shutter and 844 x 640 pixel resolution
White LED (exempt risk group)
650 nm high-visibility red laser (class 2 laser safety)
60 frames per second (max.)
Up to 584 cm ( 230˝ ) per second in total darkness with 100% UPC at 10 cm (
4˝ ) distance
Horizontal Field Angle: 42.4° /Vertical Field Angle: 33
Tilt: 360° , Pitch: ± 45, Skew: ± 60°
20% minimum reflectance
>Demos>ScanDemo.