Hyundai Coupe Tiburon 2007 Owner's Manual page 321

B340C05FC-EAT
LIGHTING SWITCH
HGK2074-E
The vehicle sidelights and headlights
are operated by rotating the end of the
turn signal switch barrel. To operate the
side lights, rotating the switch to the
first detent with ignition switch at the
"OFF" position will cause the lights to
illuminate. To operate the headlights,
the turn signal switch barrel should be
rotated to the second detent. The head-
lights will only operate when the ignition
switch is at the "ON" position. If the
ignition switch is turned to the "OFF"
position, only the side lights will func-
tion.
NOTE:
The ignition must be in the "ON"
position to turn on the headlights.
Side light auto cut
(Not all models)
o The purpose of this feature is to
prevent the battery from being dis-
charged. The system automatically
turns off the headlights and side
lights when the driver removes the
ignition key and opens the driver-
side door.
o With this feature, the side light will be
turned off automatically if the driver
parks on the side of road at night.
If necessary, to keep the lights on
when the ignition key is removed,
perform the following :
1) Open the driver-side door.
2) Turn the side lights OFF and ON
again using the light switch on the
steering column.
CONTROLS AND EQUIPMENT
SB220D1-E
HIGH AND LOW BEAM
To turn on the headlight high beams,
push the lever forward (away from
you). For low beams, pull the lever
back (toward you). The appropriate
headlight beam indicator light will come
on at the same time.
1
53