Hyundai Coupe Tiburon 2007 Owner's Manual page 100

1
FEATURES OF YOUR HYUNDAI
88
NOTE:
o The air intake control switch will
change to " " mode when the
ignition switch is turned "ON" with
the MAX A/C mode selected.
o When you change to another mode
from MAX A/C, the A/C and the air
intake control switch are set as
shown in the following chart.
Air Intake
A/C
Control Switch
ON
or
ON or OFF *
ON or OFF *
ON
ON
* The A/C or the air intake control
switch returns to its former setting.
HEATING CONTROLS
B690A02S-AAT
For normal heating operation, set the air
*
intake control to the fresh air (
position and the air flow control to the
floor ( ) position.
For faster heating, the air intake control
switch should be set in the recirculate (
) position.
If the windows fog up, set the air flow
control to the defrost ( ) position.
(The A/C will turn on automatically and
"Fresh" mode will be activated.)
For maximum heat, move the tempera-
ture control to "Warm".
BI-LEVEL HEATING
B700A02A-AAT
OGK046038
Your Hyundai is equipped with bi-level
)
heating controls. This makes it pos-
sible to have cooler air from the dash-
board vents and warmer air from the
floor outlets at the same time. To use
this feature:
o Set the air intake control switch to
the fresh air ( ) position.
o Set the air flow control at the bi-level
( ) position.
o Adjust the fan speed control to the
desired speed.
o Set the temperature control between
"Cool" and "Warm".
OGK016700