Starting; Operating The Manual Transaxle - Hyundai Coupe Tiburon 2007 Owner's Manual

Table of Contents

Advertisement

STARTING

C050A01A-AAT
ON
LOCK
START
C050A01E
!
WARNING:
Never run the engine in a closed or
poorly ventilated area any longer
than is needed to move your car in
or out of the area. The carbon mon-
oxide gas emitted is odorless and
can cause serious injury or death.
gkflgene-2.p65
5
C050B01A-GAT
Normal Conditions:
The Starting Procedure:
1. Insert key, and fasten the seat belt.
2. Depress the clutch pedal fully and
place the gearshift lever (manual
transaxle) in neutral or the selector
lever (automatic transaxle) in "P"
(park) position.
3. After turning the ignition key to the
"ON" position, make certain all warn-
ing lights and gauges are functioning
properly before starting the engine.
!
WARNING:
Be sure that the clutch is fully de-
pressed when starting a manual
transaxle vehicle. Otherwise, there
is the potential to cause damage to
the vehicle or injury to someone
inside or outside the vehicle as a
result of the forward or backward
movement of the vehicle that will
occur if the clutch is not depressed
when the vehicle is started.
4. Turn the ignition key to the "Start"
position and release it when the en-
gine starts.
6/18/2007, 11:59 AM
DRIVING YOUR HYUNDAI
OPERATING THE MANUAL
TRANSAXLE
C070A01GK-AAT
Type A
Type B
HGK3023
Your Hyundai's manual transaxle has a
conventional shift pattern. This shift
pattern is imprinted on the shift knob.
The transaxle is fully synchronized in
all forward gears so shifting to either a
higher or a lower gear is easily accom-
plished.
2
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents