Changing A Programme - Sanyo CDP-865CR Instruction Manual

CHANGING A PROGRAMME
First, press the P-MODE button during play
to display "M". The track number and "M"
blink on the display.
To change a track
1. Press the M-SET button to display the
track number to be replaced.
2. Press the EN or 144 button to select the
new track number.
3. Press the M-SET button.
To add a programme
1, Press the M-SET button to display the
last programme (track number "O).
2. Press the EN or !4< button to select a
track number.
3. Press the M-SET button.
To delete the selected programme
onward
1. Press the M-SET button to display the
programme number to be deleted.
2. Press the FW or 144 button to set the
track number display to "O.
3, Press the M-SET button to delete the
selected programme and the following
programmed. The first programme
appears.
Note:
- The programmed will be lost, when the
disc compartment is opened.
- Programmed details cannot be partially
deleted or inserted.
Normal play without erasing the
programme
1. Press the P-MODE button during
programmed play. When "M disappears,
normal play resumes.
2. To return to programmed play, press the
P-MODE button to display "M", then
mess the WII button.
15