Changing A Programme; Programmed Play - Sanyo MCD-ZX540F Instruction Manual

Cd portable radio cassette recorder
Table of Contents

Advertisement

Repeat playing mode
Press the REPEAT button repeatedly to select
a repeat play mode available. Each time the
button is pressed, the mode changes as shown
below:
[CD]
"REPEAT" blinks
(Repeat one track)
Released
(Normal play)

PROGRAMMED PLAY

Up to 20 tracks on a disc can be programmed for
play in any order.
-
To begin the programming procedure, set
function switch to "CD" first.
-
The same track can be programmed more
than once.
-
Load a disc that you want to programme be-
fore starting programmed play.
1. Press the STOP n button if necessary.
2. Press the MEMORY button, the "01" and
"MEMORY" blink.
MEMORY
3. Select a track by using the f or e but-
ton.
MEMORY
4. Press the MEMORY button.
MEMORY
540AU.indd 5
"REPEAT" appears
(Repeat all tracks)
- 5 -
5. Repeat steps 3 - 4 to programme addition-
al tracks.
6. Press the PLAY/PAUSE i button to start
playback. "MEMORY" remains lit.
MEMORY
When all programmed tracks have been
played, the player stops automatically.
-
The programme contents are retained
in memory.
-
Any attempt to programme more than 20
tracks will result in discontinuous of the
programming.
-
To cancel programmed play, press the STOP
n button twice during play.
Checking the programme
In stop mode when MEMORY remains lit
press the MEMORY button once, the pro-
grammed details sequentially appear on the
display.

Changing a programme

To add a new track to a programme:
1. In the stop mode, press the MEMORY but-
ton repeatedly until last programme number
is displayed.
2. Select a track as explained above.
3. Press the MEMORY button.
To change a track:
1. In the stop mode, press the MEMORY button
repeatedly until the programme number to be
replaced is displayed.
2. Select a track as explained above.
3. Press the MEMORY button.
Note:
Programmed details cannot be partially deleted
or inserted.
WHAT TO DO IF...
If an abnormal display indication or an operating
problem occurs, disconnect the mains lead and
remove all batteries. Wait at least 5 seconds then
reconnect the mains lead and reinstall the batteries.
Resume the operation.
2009.4.8 10:11:18 AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcd-zx541f

Table of Contents