Controls And Features; Chemical Pump - Champion 100192 Owner's Manual

CONTROLS AND FEATURES

Read this owner's manual before operating your chemical pump. Familiarize yourself with the location and function of
the controls and features. Save this manual for future reference.

Chemical Pump

1
6
7
(1) Fuel Tank – 0.9 gal. (3.4 L) capacity fuel tank.
(2) Air Filter – Protects the engine by filtering dust
and debris from the air intake.
(3) Muffler
(4) Priming Plug – Remove plug to prime pump.
Replace plug before starting pump.
(5) 2 in. (5.1 cm) Outlet – 2 in. (5.1 cm) NPT outlet
connector.
(6) Low Oil Sensor – Senses the level of oil in the
crankcase and shuts the engine down if the level
falls too low.
5
2 3
4
5
9
8
556
10
11
12
13
(7) Oil Filler Cap – Check and fill engine oil level.
(8) Drain Plug
(9) 2 in. (5.1 cm) Inlet – 2 in. (5.1 cm) NPT inlet
connector.
(10) Throttle Lever – Used to adjust engine speed.
(11) Choke lever – Used to start the engine.
(12) Recoil Starter – Used to start the engine.
(13) Fuel Valve – Used to turn fuel supply on and off to
engine.
(14) Engine Switch – Used to start the engine.
100192
ENGLISH
14