Dynojet Power Commander V Installation Instructions Manual page 6
For yamaha fz-07 2015; yamaha fz-07 2016; yamaha fz-07 2017; yamaha fz-07 2018; yamaha mt-07 2015; yamaha mt-07 2016; yamaha mt-07 2017; yamaha mt-07 2018
Hide thumbs
Also See for Power Commander V:
- Installation instructions manual (9 pages) ,
- Installation manual (9 pages) ,
- Installation instructions and owner's manuals (8 pages)
Advertisement
FIG.K
Unplug
FIG.L
22-065
www.powercommander.com
15 Just below the regulator/rectifier, locate and unplug the stock connectors for
the bike's Crank Position Sensor (Fig. K).
This is a pair of CLEAR (opaque) 2-pin connectors with a WHITE and a
GREY wire.
16 Plug the PCV wiring harness in-line of the stock CPS connectors (Fig. L).
17 Reinstall bodywork, fuel tank and seats.
15-18 Yamaha FZ-07/MT-07 - PCV F/I - 6
Advertisement
Need help?
Do you have a question about the Power Commander V and is the answer not in the manual?