8 port gigabit unmanaged switch with 8 ports poe or 4 ports poe+ (9 pages)
Summary of Contents for Pakedge Device & Software SE-5P2-EP
Page 1
SE-5P2-EP 5 Port PoE Plus Powered Gigabit Ethernet Switch with Two PoE ports Pass-through User Manual – Version 1.0...
Page 2
CE Mark Warning This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 class A for ITE, the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 3
The SE-5P2-EP also has the option to output PoE over two ports. If you power the switch via the A/C adapter you will have two Ethernet ports that can use PoE.
Page 5
DEFINITION AND GUIDE: LED definitions: Status Operation Power Steady Blue Power is on via power adapter Power is off Steady Blue Power is on via PoE input Power is off Steady Blue PoE is active on this port Blinking Blue PoE is not active on this port Link/ACT Steady Blue...